0
0 in Cart
subtotal: $0.00

Why Choose Stainless Steel Brakes?

At SSBC, we think the quality and performance of any product relies on its research and development. By constantly testing and improving our braking products, we have designed our calipers according to the highest standard possible. Our state-of-the-art calipers are not only superior to stock calipers, but surpass the competitions’ calipers time and time again. Take a look at our charts below to see how SSBC products can significantly improve your vehicle’s braking.

Give us a call if you have any questions about our products. 1-800-448-7722




SSBC Caliper VS Stock Caliper
SSBC Tri-Power Caliper Stock Caliper Results of Using SSBC Tri-Power Calipers
3- 51mm pistons 2 - 57mm pistons 36% increase in caliper-to-pad contact area creates less pad deflection and increased clamping force.
9.425 sq.in. piston area 7.88 sq.in piston area 25% more piston area and clamping force over stock.
Billet Aluminum Construction Cast Iron Lighter weight and better heat dissipation which extends the life of your brake fluid, brake pads and rotors.
Internal Dust seal External dust seal Internal dust seal is further away from the heat of the brake pads extending your caliper and brake fluid life.
Clear Anodize coating No protective coating Caliper bore and external surfaces will outlast any factory caliper on the market due to corrosion.
Stainless Steel Pistons Steel Pistons Stainless pistons dissipate heat and resist corrosion.
Dual Bleeder screws Single bleeder screws Universal calipers that can mount on either side of the vehicle. No need to worry about mounting the caliper on the correct side.
100% USA Made Overseas manufacture American-made quality you can trust.
Teflon coated bleeder screws Zinc plated bleeder screws Teflon coating resists corrosion extending service life of caliper.


SSBC Caliper VS Competitor 6-Piston Caliper
SSBC Tri-Power Caliper Average 6-Piston Caliper Results of Using SSBC Tri-Power Calipers
3- 51mm pistons with 9.425 sq.in. piston area 48, 35, 33.5 mm pistons with 6.90 sq.in piston area 36% more piston area and clamping force over stock calipers.
Billet aluminum construction Aluminum Lighter weight and better heat dissipation extending the life of your brake fluid, brake pads and rotors.
Internal dust seal No dust seal Internal dust seal is further away from the heat of the brake pads extending your caliper and brake fluid life.
Clear anodize coating Black annodize coating Caliper bore and external surfaces will outlast any caliper on the market due to corrosion.
5/16-24 full size bleeders 1/8 inch bleeders Universal calipers that can mount on either side of the vehicle. No need to worry about mounting the caliper on the correct side.
Pad size 8.51 x 2.63 x .75 Pad size 6.40 x 2.74 x .71 32% increase in pad length gives an increased contact area.
100% USA made Manufacturer unknown American-made quality you can trust.
Teflon coated bleeder screws Brass adapter Teflon coating resists corrosion extending service life of caliper.
Direct Bolt on Assorted brackets & spacers SSBC calipers mount directly to your vehicles spindle using stock hardware.
Uses D784 brake pad Uses specialty pad Teflon coating resists corrosion extending service life of caliper.
Fits in 17" stock wheels Requires 20" wheels SSBC fits in factory wheels, saving the cost of new wheels and tires, and works with your spare tire.
$1,114.95 $2,486.39 SSBC's calipers typically cost less than compeitor products.